Putty is a product used to fill any defective material such as natural fibers such as wilting, metal, or other materials. All materials must have the smooth texture which will decrease the aesthetic value of material appearance. For example, wood furniture that has uneven or rough surfaces. Putty will flatten the surface well. The way to smooth wood must be done well in order to create a smooth and flat surface furniture. In the meantime, you may visit https://bighomechores.com/best-benchtop-jointer/ to know about the recommended tools for making your wood smooth again
Here are tips you can follow:
Choose the appropriate type of sandpaper for putty. To produce a smooth surface on the furniture then you can choose a smooth type of sandpaper. The good sandpaper is the aluminum oxide no. 240.
The way the application of putty should not be too thick because it will affect the uneven surface, spend time and also wasteful putty. Make sure you give the putty thinly because the workmanship can be repeated if the texture defects are still many.
For your own sanding technique use wooden blocks wrapped with sandpaper. If you use a finger it may not be the same emphasis then the surface must be uneven.
For putty products there are many, choose according to the needs of putty wood, putty for metal and putty for the wall. For own wood putty, you can choose the Wood Filler which is a safe water-based putty without chemicals.
Perform Steps How to Cultivate Wood
Make sure the surface of the wood material should be dry and smooth. If the surface is rough or even you will do the recoating process then sand the entire surface of the material with coarse sandpaper around the number 180.
Flatten the Wood Filer with scrape blade across the surface evenly, remember do it thinly. Wait dry without drying for about 20 minutes only and sandpaper with sandpaper no. 240.
If you have seen wood fiber but still many holes to fill, re-apply putty with a scrape blade and do the above steps once again. If it is dry and finished in the sandpaper the material is ready for the next step or staining.