Paint to be used must be stirred first so as not to clot and produce optimal color. Stir for about five minutes. Mix the paint with water as much as 10 percent of the amount of paint used. In the meantime, you can also call the recommended Painters Brisbane to paint your house professionally. They’re the trusted and one of the best painters that can be hired in and around Brisbane. Don’t hesitate to call them whenever you want to get an excellent painting service.

Mix Paint with Water Base or Solvent

Cover the surface of the wall to be painted with a quality water based or solvent. This will make the paint more even, smooth, and not easy to peel.

You can also use a wall sealer to adjust the pH of the cement with ph paint so that the color is more durable.

Give Basic Color

If you want to change the color of the wall with a color other than white, you must sand the wall first to remove the previous color.

But if it’s too much trouble, you can replace it by giving it a white base color first. The white base color will make the paint color brighter.

In order for the quality of the wall color to be the same, you should work on one surface area at a time. The time interval between layers one and two is about 1-2 hours.

Use a Small Brush

The paint roller will help to paint on a large wall surface. But to reach a narrow area such as a corner of the room, you need a small size brush so that the results of the paint do not fall apart.

Use ZigZag Techniques

Paint the zigzag method from top to bottom repeatedly until the wall is flat. This method is also used to flatten the color of the wall surface.